CS代考 CITS2002 Systems Programming – cscodehelp代写

CITS2002 Systems Programming
1 next ¡ú CITS2002 CITS2002 schedule
An Overview of Computer Hardware
Any study of operating systems requires a basic understanding of the components of a computer system.
Although the variety of computer system configurations is forever changing, as (new) component types employ different standards for their interconnection, it is still feasible to discuss a simple computer model, and to discuss components’ roles in operating systems.
Traditionally, we consider four main structural components:
The Central Processing Unit, or CPU, undertakes arithmetic and logical computation, and directs most input and output services from memory and peripherals. There may be multiple processors in a system, each executing the (same, single) operating system or user/application programs.
Main Memory, or RAM (Random Access Memory) is used to store both instructions and data. Processors read and write items of memory both at the direction of programs (for data), and as an artifact of running programs (for instructions).
Secondary Storage and Peripheral Devices, (or input/output modules) and their I/O controllers, move data to and from the other components usually to provide longer-term, persistent storage of data (disks, tapes),
A communications bus, or system bus, connects the processor(s), main memory, and I/O devices together, providing a “highway” on which data may travel between the components. Typically only one component may control the bus at once, and bus arbitration decides which that will be.
Excellent, albeit expensive, computer organisation texts
Computer Organization and Design (MIPS Edition): The Hardware/Software Interface, by . Patterson and . Hennessy. Publishers, 6th edition, 2021.
Computer Organization: Basic Processor Structure, de Lamadrid, Chapman and Hall/CRC, Published February 23, 2018, 372pp, ISBN 9781498799515.
CITS2002 Systems Programming, Lecture 5, p1, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 2 next¡ú CITS2002 CITS2002schedule
Basic Computer Components
Many OS textbooks (often in their 1st or 2nd chapters) outline a traditional computer model, in which the CPU, main memory, and I/O devices are all interconnected by a single system bus (figures are taken from Stallings’ website).
Instruction and data fetching
The CPU fetches a copy of the contents of uniquely- addressed memory locations, by identifying the required location in its MAR (Memory Address Register).
Depending on why the CPU requested the memory’s value, it executes the contents as an instruction, or operates on the contents as data.
Similarly, the CPU locates data from, or for, distinct locations in the I/O devices using its I/O-AR (Address Register).
Role of operating
The role of the OS in managing the flow of data to and from its CPU and I/O devices, made very challenging by the wide variety of devices.
The OS attempts to attain maximum throughput of its computation and data transfer.
Processor scheduling attempts to keep the (expensive) processor busy at all times, by interleaving computation and communication.
While for a slow device to complete its I/O transfer, the CPU may be able to undertake other activities, such as performing some computation or managing faster I/O.
CITS2002 Systems Programming, Lecture 5, p2, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 3 next¡ú CITS2002 CITS2002schedule
The Range of I/O Device Data Rates
See also Wikipedia’s List of interface bit rates.
CITS2002 Systems Programming, Lecture 5, p3, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 4 next¡ú CITS2002 CITS2002schedule
Processor Registers
As well as special logic to perform arithmetic and logic functions, the processor houses a small number of very fast memory locations, termed processor registers.
Data in registers can be read and written very rapidly (with a typical access time of 0.5- 3ns). If the required data is available in registers, rather than main memory, program execution may proceed 10-500X faster.
Different types of processors have varying number of registers, For example, some processors have very few (3-16), some have many (32-100s).
The number of general-purpose CPU registers, and the width of each register (measured in bits, e.g. 64-bit registers), contribute to the power and speed of a CPU.
Processors place constraints on how some registers are used. Some processors expect certain types of data to reside in specific registers. For example, some registers may be expected to hold integer operands for integer arithmetic instructions, whereas some registers may be reserved for holding floating-point data.
The Role of Processor Registers
All data to be processed by the CPU must first be copied into registers – the CPU cannot, for example, add together two integers residing in RAM.
Data must first be copied into registers; the operation (e.g. addition) is then performed on the registers and the result left in a register, and that result (possibly) copied back to RAM.
Registers are also often used to hold a memory address, and the register’s contents used to indicate which item from RAM to fetch.
The transfer of data to and from registers is completely transparent to users (even to programmers).
Generally, we only employ assembly language programs to manipulate registers directly. In compiled high-level languages, such as C, the compiler translates high-level operations into low-level operations that access registers.
CITS2002 Systems Programming, Lecture 5, p4, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 5 next¡ú CITS2002 CITS2002schedule
Register types
Registers are generally of two types:
User-accessible registers –
are accessible to programs, and may usually be read from and written to under program control. Programs written in an assembly language, either by a human programmer or generated by a compiler for a high-level language, are able to read and write these registers using specific instructions understood by the processor which usually accept the names of the registers as operands.
The user-accessible registers are further of two types:
Data registers hold values before the execution of certain instructions, and hold the results after executing certain instructions.
Address registers hold the addresses (not contents) of memory locations used in the execution of a program, e.g.
the memory address register (MAR)holds the address of memory to be read or written;
the memory buffer register (MBR) holds the memory’s data just read, or just about to be written;
index registers hold an integer offset from which of memory references are made; and
a stack pointer (SP) holds the address of a dedicated portion of memory holding temporary data and other memory addresses.
Control and status registers –
hold data that the processor itself maintains in order to execute programs, e.g. the instruction register(IR) holds the current instruction being executed, and theprogram counter (PC) holds the memory address of thenext instruction to be executed.
Special registers reflect the status of the processor. The processor status word (PSW) reflects whether or not the processor may be interrupted by I/O devices and whether privileged instructions may be executed, and it uses condition bits to reflect the status of recently executed operations.
In order evaluate results, and to determine if branching should occur, the PSW may record –
whether an arithmetic operation overflowed,
whether an arithmetic operation performed a carry,
whether a division by zero was attempted,
whether the last comparison instruction succeeded or failed.
CITS2002 Systems Programming, Lecture 5, p5, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 6 next¡ú CITS2002 CITS2002schedule
The Memory Hierarchy
The role of memory is to hold instructions and data until they are requested by the processor (or, some devices). While it is easy to make a case for as much memory as possible, having too much can be wasteful (financially) if it is not all required.
We also expect memory to be able to provide the necessary data, as quickly as possible, when called upon. Unfortunately, there is a traditional trade-off between cost, capacity, and access time:
the faster the access time, the greater the cost per bit,
the greater the capacity, the smaller the cost per bit and, the greater the capacity, the slower the access time.
CITS2002 Systems Programming, Lecture 5, p6, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 7 next¡ú CITS2002 CITS2002schedule
The Memory Hierarchy, continued
The solution taken is not to rely on a single, consistent form of memory, but instead to have a memory hierarchy, constrained by requirements and cost.
Memory Access-time
Registers 0.5-3ns
Capacity Technology
1-4KB custom CMOS 8KB-256KB SRAM
128MB-24,000GB magnetic 16GB-18,000GB DRAM/SRAM
Managed by
compiler hardware
hardware operating system operating system operating system
Level-1 cache (on- chip)
Level-2 cache (on- chip)
Level-3 cache
Main memory (RAM) hard disk
solid-state disk (SSD)
6-16ns 10-60ns 3M-10M ns 0.5M-1M ns
For example, a contemporary laptop or home computer system may include:
a modest amount of cache memory (1MB) to deliver data as quickly as possible to the processor,
a larger main memory (8GB) to store entire programs and less-frequently required data, and
long term, persistent storage in the form of a hard disk (1TB), or SSD (256GB).
CITS2002 Systems Programming, Lecture 5, p7, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 8 next¡ú CITS2002 CITS2002schedule
Units of data: bits, bytes, and words
The basic building block is the bit (binary digit), which can contain a single piece of binary data (true/false, zero/one, high/low, etc.).
Although processors provide instructions to set and compare single bits, it is rarely the most efficient method of manipulating data.
Bits are organised into larger groupings to store values encoded in binary bits. The most basic grouping is the byte: the smallest normally addressable quantum of main memory (which can be different from the minimum amount of memory fetched at one time).
In modern computers, a byte is almost always an 8-bit byte, but history has seen computers with 7-, 8-, 9-, 12-, and 16-bit bytes.
A word is the default data size for a processor. The word size is chosen by the processor’s designer and reflects some basic hardware issues (such as the width of internal or external buses).
The most common word sizes are 32 and 64 bits; historically words have ranged from 16 to 60 bits.
It is very common to speak of a processor’s wordsize, such as a 32-bit or 64-bit processor.
However, different sources will confuse whether this means the size of a single addressable memory location, or the default unit of integer arithmetic.
Some processors require that data be aligned, that is, 2-byte quantities must start on byte addresses that are multiples of two; 4-byte quantities must start on byte addresses that are multiples of four; etc.
Some processors allow data to be unaligned, but this can result in slower execution as the processor may have to align the data itself.
CITS2002 Systems Programming, Lecture 5, p8, 9th August 2021.
CITS2002 Systems Programming
¡ûprev 9 next¡ú CITS2002 CITS2002schedule
On the interpretation of data
We have seen that computer systems store their data as bits, and group bits together as bytes and words.
However, it is important to realise that the processor can interpret a sequence of bits only in context: on its own, a sequence of bits means nothing.
A single 32-bit pattern could refer to:
4 ASCII characters,
a 32-bit integer,
2 x 16-bit integers,
1 floating point value,
the address of a memory location, or an instruction to be executed.
No meaning is stored along with each bit pattern: it is up to the processor to apply somecontext to the sequence to ascribe it some meaning.
For example, a sequence of integers may form a sequence of valid processor instructions that could be meaningfully executed; a sequence of processor instructions can always be interpreted as a vector of, say, integers and can thus be added together.
Critical errors occur when a bit sequence is interpreted in the wrong context. If a processor attempts to execute a meaningless sequence of instructions, a processor fault will generally result: Linux announces this as a “bus error”. Similar faults occur when instructions expect data on aligned data boundaries, but are presented with unaligned addresses.
CITS2002 Systems Programming, Lecture 5, p9, 9th August 2021.
CITS2002 Systems Programming
¡û prev 10 CITS2002 CITS2002 schedule
On the interpretation of data, continued
As an example of how bytes may be interpreted in different ways, consider the first few hundred bytes of the disk file /bin/ls. We know this to be a program, and we expect the operating system to interpret its contents to be a program, and request the processor to execute its contents (a mixture of instructions and data).
However, another program could read the bytes from /bin/ls and interpret them in other ways, e.g. as 32-bit integers:
prompt> od -i /bin/ls 0000000 1179403647 0000020 196610 0000040 66628 0000060 1638426 0000100 134512692 0000120 4 0000140 134512916 0000160 1 …….
or as octal (8-bit) bytes:
prompt> od -b /bin/ls 0000000 177 105 114 106 001 0000020 002 000 003 000 001 0000040 104 004 001 000 000 0000060 032 000 031 000 006 0000100 064 200 004 010 340 0000120 004 000 000 000 003 0000140 024 201 004 010 023 0000160 001 000 000 000 001 …….
or as ASCII characters:
0 0 52 2097204 2621447 52 134512692 224 5 276 134512916 19 4 0 134512640
000 000 000 000 000
000 220 226 004 010
000 064 000 040 000
000 064 000 000 000
000 340 000 000 000
000 024 001 000 000
000 023 000 000 000
000 000 000 000 000
1 134518416
6 224 3 19 1
000 000 000 000
064 000 000 000
007 000 050 000
064 200 004 010
005 000 000 000
024 201 004 010
004 000 000 000
000 200 004 010
prompt> od -c /bin/ls
0000000177 E L F001001001
0000020002 003 001
0000040 D004001 4 a ( 0000060032 031 006 4 4200004  0000100 4200004 340 340 005 0000120004 003 024001 024201004  0000140024201004 023 023 004 0000160001 001 200004  …….
And each interpretation could be correct, depending on context.
CITS2002 Systems Programming, Lecture 5, p10, 9th August 2021.


Leave a Reply

Your email address will not be published. Required fields are marked *